 | BODY MANUFACTURED IN
REINFORCED POLYPROPYLENE, JOINTS IN NBR, SCREW FASTENERS IN BICHROMATED
IRON (4 SCREWS FROM DIAMETER 63 mm.) |
| THREADS MANUFACTURED IN
ACCORDANCE WITH STANDARDS UNE 19009, ISO R-7, DIN 2999 AND UNI 338. |
| ASSEMBLY: IN PE OR PVC
TUBES PROVIDED THAT THEY CONFORM TO STANDARDS UNE 53428 (CPCB), UNE
53112 (PVC) O UNE 53131 (PE). ACCESSORIES WITH STANDARD THREAD
SIZES ARE USED TO SCREW THE FLANGES TO THE OUTLETS. THE
TEMPERATURE PERFORMANCE OF THE CLAMP SADDLES IS IDENTICAL TO THAT O PE
TUBES. IT IS RECOMMENDED THAT THE INSTALLATION SHOULD BE CHECKED
BEFORE BEING INSTALLED UNDERGROUND AND THAT PTFE IS USED FOR THE
SCREW-FASTENED JOINTS. |
|
|
|
|
| Use the flange as a
template for drawing the hole. |
Make the hole with a
suitable tool. |
Clean off any chips and
locate the joint in its seat, centre the opening in the hole and
screw in. |
|
MEASURES (mm.)
|
 |
|
Ø TUBE |
THREAD |
A |
B |
C |
|
25 |
1/2" |
42 |
38 |
52 |
| 3/4" |
|
32 |
1/2" |
44 |
38 |
60 |
| 3/4" |
41 |
|
40 |
1/2" |
49 |
38 |
72 |
| 3/4" |
41 |
| 1" |
48 |
|
50 |
1/2" |
52 |
38 |
81 |
| 3/4" |
41 |
81 |
| 1" |
48 |
86 |
|
63 |
1/2" |
69 |
38 |
94 |
| 3/4" |
41 |
94 |
| 1" |
48 |
99 |
| 1 1/4" |
58 |
99 |
| 1 1/2" |
66 |
99 |
|
75 |
1/2" |
85 |
38 |
112 |
| 3/4" |
41 |
109 |
| 1" |
48 |
112 |
| 1 1/4" |
58 |
114 |
| 1 1/2" |
66 |
114 |
| 2" |
78 |
118 |
|
90 |
1/2" |
87 |
38 |
121 |
| 3/4" |
41 |
124 |
| 1" |
48 |
127 |
| 1 1/4" |
58 |
129 |
| 1 1/2" |
66 |
129 |
| 2" |
78 |
133 |
|
110 |
3/4" |
105 |
38 |
147 |
| 1" |
48 |
150 |
| 1 1/4" |
58 |
155 |
| 1 1/2" |
66 |
152 |
| 2" |
78 |
156 |
|
125 |
3/4" |
102 |
38 |
166 |
| 1" |
48 |
168 |
| 1 1/4" |
58 |
172 |
| 1 1/2" |
66 |
172 |
| 2" |
78 |
175 |
|
|
