|
CONNECTIONS
 | MANUFACTURED IN
POLYPROPYLENE. CONNECTION IN 25 MANUFACTURED IN ABS.
|
| ASSEMBLY: ACCESSORY USED
TO JOINT STANDARD PE32 LOW PRESSURE TUBES FOR MICRO-IRRIGATION. THIS
TYPE OF ACCESSORY IS INSERTED INTO THE TUBE. THE SAW TOOTH PATTERN ON
THE SURFACE MAKE EASY TO SLIDE THE TUBE UP TO THE CENTRAL STOP, BUT
PREVENTS IT FROM COMING OUT.
|
|
USE IN STANDARD PE32 TUBES. |
|
MEASURES (mm.)
|
 |
|
Ø
TUBE |
A |
B |
C |
D |
|
12
|
8 |
11 |
24 |
48 |
| 16 |
10 |
15 |
28 |
56 |
| 18 |
12 |
17 |
29 |
58 |
| 20 |
14 |
19 |
33 |
66 |
| 25 |
16 |
24 |
31 |
62 |
|
REDUCED CONNECTION
|
MANUFACTURED IN
POLYPROPYLENE..
|
|
ASSEMBLY: ACCESSORY USED TO
JOINT STANDARD PE32 LOW PRESSURE TUBES FOR MICRO-IRRIGATION. THIS TYPE
OF ACCESSORY IS INSERTED INTO THE TUBE. THE SAW TOOTH PATTERN ON THE
SURFACE MAKE EASY TO SLIDE THE TUBE UP TO THE CENTRAL STOP, BUT PREVENTS
IT FROM COMING OUT.
|
|
USE IN STANDARD PE32 TUBES.. |
|
MEASURES (mm.)
|
 |
|
Ø
TUBE |
A |
B |
C |
D |
E |
|
16-12
|
15
|
11 |
27 |
22 |
51 |
| 20-16 |
19 |
15 |
32 |
25 |
59 |
|
SAFETY CONNECTION
| THE SAFETY MODELS ARE
CHARACTERIZED BY A MOBIL RING WHICH INCREASES IN DIAMETER IF THE TUBE
SHOWS SIGNS OF COMING OUT OF THE ACCESSORY, THEREBY IMMOBILIZING THE
TUBE AND PREVENTING IT FROM WORKING LOOSE. THIS SYSTEM ALLOWS ALSO TO
OPERATE WITH THINNER THAN STANDARD TUBES.
|
| BODY IN ABS AND RING Y
ACETAL RESIN.
|
| ASSEMBLY AND USE THE
SAME AS THE PREVIOUS TYPES. |
|
MEASURES (mm.)
|
 |
|
Ø
TUBE |
A |
B |
C |
|
16
|
15 |
29 |
58 |
| 20 |
19 |
30 |
60 |
|
REDUCED SAFETY
CONNECTION
| THE SAFETY MODELS ARE
CHARACTERIZED BY A MOBIL RING WHICH INCREASES IN DIAMETER IF THE TUBE
SHOWS SIGNS OF COMING OUT OF THE ACCESSORY, THEREBY IMMOBILIZING THE
TUBE AND PREVENTING IT FROM WORKING LOOSE. THIS SYSTEM ALLOWS ALSO TO
OPERATE WITH THINNER THAN STANDARD TUBES.
|
|
BODY IN ABS AND RING Y
ACETAL RESIN.
|
|
ASSEMBLY AND USE THE SAME AS
THE PREVIOUS TYPES. |
|
MEASURES (mm.)
|
 |
|
Ø
TUBE |
A |
B |
C |
D |
E |
| 20-16 |
15 |
19 |
30 |
28 |
58 |
|
CONNECTIONS
XRT
|
THE XRT MODELS HAVE AN
IMPROVED DESIGN OF THE SAFETY RINGS THAT, EVEN LOOKING SO SIMPLE,
HOLD THE TUBE WITH THE SAME FIABILITY AND LESS WATER LOOSES THAN WITH
THE SAFETY RING, ALLOWING THE INSTALLATION OF THIS ACCESORY WITH
LESS EFFORT. THIS SYSTEM ALLOWS TOO THAT THE ACCESORY WORKS WITH PIPES
WITH LESS THICKNESS TO STANDARDIZED.
|
|
BODY IN ABS.
|
|
INSTALLATION AND USE AND
MEASURES SAME THAN IN THE OTHER OUTLETS.
|
|
PATENTED DESIGN. |
|
