MANUFACTURED IN POLYPROPYLENE.

ASSEMBLY:  INSERT THE TAPERED PART OF THE ACCESSORY INTO THE TUBE.

APPLICATION:
- MEASURE 7 x 5: PLUG THE HOLES MADE WITH THE  3 mm PUNCH, USED TO LOCATE THE DRIPPERS,, MICRO-SPRINKLERS, MICRO-DIFFUSERS  AND  THREADED DIFFUSER INTO THE TUBE PE32 (maximum permitted thickness 2 mm.). IS ALSO USED AS STOPPER FOR THE MICROTUBE 6 x 4.

- MEASURE 15 x 10: PLUG THE HOLES MADE WITH THE  7 mm PUNCH,. USED TO LOCATE THE  OUTLETS  (ref. 1051, 1103, 1104, 1141) ON PE32 TUBE (maximum permitted thickness 4,8 mm.).

- MEASURE 5 x 3: PLUG THE 1 AND  2 mm DIAMETER HOLES IN PE32 TUBE (maximum permitted thickness 2 mm).