The highflow stick offers a wide range of flow that we can obtain by turning the top piece, what makes it perfect for almost any situation. Every turn is divided in 16 “clicks” for a more precise adjustment. With pressures higher to 1 bar we can obtain flow of more than 100 l/h (see table).

It offers a microtube outlet for his connection to the irrigation system.
The difference with the overflow dripper is that, having the same characteristics as emitter, we obtain the advantage that nailing in land we are obtaining higher height and its position will be more stable, because it is not affected by pipe movements. The height can be increased by adding the Ref.1125 simple stick (see picture), that allows to joint one stick to other and to the overflow stick. The height on the beginning is about 14 cms., and by adding sticks we will increase height and we could increase the action ratio of the irrigation or exceed the height of some plants.

Made in resistant material to agrochemicals and to the UV radiations effects.
 

INSTALLATION: SEPARATE MICROTUBE OUTLET FROM STICK, PERFORATE MAIN PIPE (Max. thickness 3,8 mms) WITH THE 3 mms PUNCH (REF. 1170, 1158), AND INSERT THE OUTLET BY THE SIDE BY “ARROW END”. JOINT WITH MICROTUBE THE OUTLET AND THE STICK AND NAIL ON THE GROUND THE STICK.

USE WITH PVC MICROPIPE OF INSIDE THICKNESS LESS THAN 4 mms OR MICROTUBE PE/EVA OF INSIDE THICKNESS OF 4,5 mms