 | Heavy-duty solenoid: 24VAC, 475mA inrush current, 230mA holding current, 50 cycles. |
| Made in PVC and stainless steel for higher
durability. |
| Manual starting if necessary. |
| Internal manual bleed. Easy to use and keeps valve box dry. |
| Flow control with non-rising handle. Adjust the flow of each zone on a system. |
| Rigid diaphragm support. Works to prevent stress failure in tough conditions. |
| Captive bonnet bolts and solenoid plunger. No lost parts during
servicing. |
| Measures:
1.1/2": 19 cm H x 15 cm W x 11 cm D.
2": 20 cm H x 17 cm W x 13 cm D. |
| Flow: see table. |
| Pressure: 1,4 to 10,3 bar. |
