 |
HUNTER SRS
SPRAY SPRINKLERS
HOME > PRODUCT INDEX >
SPRINKLERS > HUNTER SRS SPRAY SPRINKLERS
The SRS lets you take advantage of a spray that offers the unrivaled degree of Hunter quality no matter what nozzle you currently have in stock. Better yet, choose to install the
adjustable arc nozzles Hunter has created exclusively for use in tandem with the SRS. Either way, you’ll receive a superior spray. One whose construction, highlighted by a rugged flat body cap, is both brawny and durable. And one whose performance delivers the most effective coverage possible, thanks to a no-flow-by wiper seal that allows your system to handle low water pressure as proficiently as high. And, best of all, what truly makes this spray head so hard to resist is that its price is so easy to
handle.
|
 | Rugged body cap design. Stands up to heavy traffic in public
areas. |
| Compatible with almost all standard nozzles. |
| Heavy-duty UV-resistant wiper seal, assures long life at a wide range of water pressures |
| Ratcheting riser for quick arc alignment ensures quick pattern
alignment. |
| Strong stainless steel spring ensures reliable retraction year after
year. |
| Pop-up: 7,5 cm. |
| I |
| Connection: 1/2" bsp female inlet. |
| Exposed diameter: 5 cm. |
INSTALLATION
-
Flush lines, making sure the flush caps are directed away from trench.
-
Install screen into riser opening and screw Hunter's Pro-Spray Fixed Pattern
Nozzles, Adjustable Arc Nozzles or Specialty Nozzles or other female threaded nozzle onto riser.
If necessary, adjust arc and radius for each sprinkler as described
below.
ARC ADJUSTMENT
-
The Hunter Adjustable Arc nozzles come from the factory with a preset arc of 25°.
Hold the perimeter of the nozzle with fingers and turn the nozzle counterclockwise to increase the arc.
-
To decrease the arc, hold the perimeter of the nozzle with fingers and turn the nozzle
clockwise.
Note: The arc can also be increased or decreased by using a flat-bladed screwdriver
RADIUS ADJUSTMENT
-
Hold the nozzle arc stationary with fingers, or with the two pins on the side of the Hunter wrench between any of the nozzle
spokes.
-
Adjust the radius with a flat-bladed screwdriver by turning the center screw clockwise to reduce the radius.
Note: The radius should not be reduced more than 25%. The sprinkler is preset at the factory for maximum radius.
|
|
|
|
