 | MANUFACTURED IN
POLYPROPYLENE. |
| ASSEMBLY: ACCESSORY USED
TO JOINT STANDARD PE32 LOW PRESSURE TUBES FOR MICRO-IRRIGATION. THIS
TYPE OF ACCESSORY IS INSERTED INTO THE TUBE. THE SAW TOOTH PATTERN ON
THE SURFACE MAKE EASY TO SLIDE THE TUBE UP TO THE CENTRAL STOP, BUT
PREVENTS IT FROM COMING OUT. |
|
USE IN STANDARD PE32 TUBES.
|
TEE UNION
|
MEASURES (mm.)
|
 |
|
Ø
TUBE |
A |
B |
C |
D |
|
12
|
8
|
11 |
29 |
35 |
| 16 |
10 |
15 |
35 |
41 |
| 20 |
14 |
19 |
43 |
52 |
|
REDUCED TEE UNION
|
MEASURES (mm.)
|
 |
|
Ø
TUBE |
a |
b |
A |
B |
C |
D |
|
16-12
|
8 |
11 |
10 |
15 |
35 |
38 |
| 20-12 |
8 |
11 |
14 |
19 |
43 |
42 |
| 20-16 |
11 |
15 |
14 |
19 |
43 |
44 |
|
TEE
XRT
|
THE XRT MODELS HAVE AN
IMPROVED DESIGN OF THE SAFETY RINGS THAT, EVEN LOOKING SO SIMPLE,
HOLD THE TUBE WITH THE SAME FIABILITY AND LESS WATER LOOSES THAN WITH
THE SAFETY RING, ALLOWING THE INSTALLATION OF THIS ACCESORY WITH
LESS EFFORT. THIS SYSTEM ALLOWS TOO THAT THE ACCESORY WORKS WITH PIPES
WITH LESS THICKNESS TO STANDARDIZED.
|
|
BODY IN ABS.
|
|
INSTALLATION AND USE AND
MEASURES SAME THAN IN THE OTHER OUTLETS.
|
|
PATENTED DESIGN. |
|
