MATERIALS: POLYPROPYLENE.

ASSEMBLY: 
 - INSERT THE TAPE THROUGH THE TAPERED SECTION OF THE PART UP TO THE STOP AND TURN THE NUT ANTI-CLOCKWISE (TOWARDS THE OUTSIDE) UNTIL IT COMPRESSES THE TAPE.  ENSURE THAT THE TAPE IS NOT TWISTED.
 - IN PE 32 TUBES, PUNCH THE MAIN TUBE WITH A 7 mm. PUNCH PART NUMBER 1171/1159 AND INSERT THE WATER INLET.  THE MAXIMUM PERMITTED THICKNESS OF THE MAIN TUBE IS 4,5 mm.

APPLICATION: USED IN TAPES OF 16-17 mm. BETWEEN 0,1 AND 0,9 mm THICK.